Honeywell 3800ISR050E User Manual - Page 20
Connecting the Scanner When Powered by Host, Keyboard Wedge
![]() |
View all Honeywell 3800ISR050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting the Scanner When Powered by Host (Keyboard Wedge) A scanner can be connected between the keyboard and PC as a "keyboard wedge," plugged into the serial port, or connected to a portable data terminal in wand emulation or non decoded output mode. The following is an example of a keyboard wedge connection: 1. Turn off power to the terminal/computer. 2. Disconnect the keyboard cable from the back of the terminal/ computer. Disconnect 3. Connect the appropriate interface cable to the 3 scanner and to the terminal/ computer. 1 2 4. Turn the terminal/computer power back on. The scanner beeps. 5. Verify the scanner operation by scanning a bar code from the Sample Symbols in the back of this manual. The scanner beeps once. 1 - 6 3800i/3800r User's Guide
![](/manual_guide/products/honeywell-3800isr050e-user-manual-549efa7/20.png)