Honeywell 3800ISR050E User Manual - Page 74
Laser Emulation Polarity, Secondary Trigger Mode, Manual Trigger, Automatic Trigger, Presentation Mode
View all Honeywell 3800ISR050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Laser Emulation Polarity The Polarity can be sent as standard with white bars high, or reversed with black bars high. Default = White High. * White High Black High Laser Emulation Idle The idle describes the state of the scanner when no data is being transmitted. When in Non Decoded mode, you must set the scanner's idle state to match the idle state for the device to which the scanner is connected. Default = Idle High. Idle Low * Idle High Secondary Trigger Mode Manual Trigger: You must press the scanner trigger to scan. When not scanning, idle power is maintained. Default = Manual Trigger. * Manual Trigger Automatic Trigger: The scanner scans continuously at full power. Automatic Trigger Presentation Mode: The LEDs are off until a bar code is presented to the scanner. Then the LEDs turn on automatically to read the code. Presentation Mode uses ambient light to detect the bar codes. Presentation Mode 6 - 4 3800i/3800r User's Guide