Honeywell 3800ISR050E User Manual - Page 73
Secondary Laser Emulation, Laser Emulation Transmission Rate, Same Code Output
View all Honeywell 3800ISR050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Secondary Laser Emulation Use this selection when connecting to a secondary terminal with integral decoding. This also sets the transmission rate to 36 scans per second, the polarity to white high, and deletes all prefixes and suffixes. * Laser Emulation Same Code Output When you scan the following bar code, the imager sends the raw data edges to the host for host decoding. This also sets the transmission rate to 36 scans per second and the polarity to white high. Laser Emulation Raw Output When you scan the following bar code, the scanner decodes and re-encodes the data and sends the data to the host as Code 39. Laser Emulation Code 39 Output Laser Emulation Transmission Rate The transmission rate is limited by the terminal's ability to receive data without dropping characters. Default = 36 scans/second. * 36 100 3800i/3800r User's Guide 6 - 3