Honeywell 6271C User Guide - Page 8

About the TouchCenter (cont'd) ITEM NIGHT MultiPartitions MORE CHOICES FUNCTION Press this button to arm when you are staying home and do not expect anyone to use the entrance door. Your installer may have configured NIGHT Mode differently; have him/her describe the actual settings of this mode. Check this circle when you want to arm more than one partition. When Multi-Partitions is checked, all partitions within the system can be armed at one time (if the user is so authorized). When the Arm Multi-Partitions circle does not contain a check mark, each partition must be armed individually. Note: This option may not be shown for some single partition systems. Press this button for more Security, Lighting, and TouchCenter setup features. System Troubles The "Arming" screen also displays an Icon(s) if a system trouble(s) occurs. The system trouble Icon is displayed to the left of the Panic button. If a trouble Icon is shown, contact your alarm company. The following Icons may be shown as applicable to your system: ICON MEANING AC Loss - The system is not receiving AC power. Bell Failure - The system bell or siren has a problem. Note: This Icon will be displayed when interfacing with residential panels only. Expander Failure - The system has a failure in an expansion module. Low Battery - The system battery, that powers the system during an AC power loss, is low. LRR Supervision Failure - The Long Range Radio or Alarmnet -I used to communicate with the central station has a supervision failure. Note: This Icon will be displayed when interfacing with residential panels only. Pager Failure - The system cannot communicate with an assigned pager. Phone Line 1 Failure - The system is not able to communicate with the central monitoring station over the primary phone line. Phone Line 2 Failure - The system is not able to communicate with the central monitoring station over the secondary phone line. Wireless Failure - The system is not able to communicate with its wireless devices. 8