Honeywell CT2800 Owner's Manual - Page 18
Operation, Change Clock for Daylight/Standard Time
View all Honeywell CT2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
d. Set the System switch to Cool, and the Fan switch to Auto. Fig. 26. e. Press Temp until the setting is 10°F (6°C) below room temperature (Fig. 26). Your cooling system and fan should start. NOTE: When cooling setting is changed, thermostat can delay up to five minutes before turning on air conditioner. This delay protects the compressor. f. Press Temp until setting is 10°F (6°C) above room temperature.Your cooling system and fan should stop. g. Set the System switch to Off and the Fan switch to Auto. The cooling system and fan should be off. OPERATION Change Clock for Daylight/Standard Time a. Press Clock/Day once. The time is displayed. b. Press and hold Time until the correct time is displayed. Run c. Press Program once. The current time and day and current temperature display. 69-1638-1 18