Honeywell HAW500 User Guide - Page 5

OPERATION INSTRUCTIONS FILLING THE TANK In order for the HydraPure) air washer to work properly, the tank should be filled with water prior to operation. • Remove the tank by grasping the tank handle and pulling the tank up and away from the unit (Fig. 12). • Remove the water tank cap by twisting to the left and pulling the cap away from the tank. • Fill the tank with water by holding it flat and below the water faucet (Fig. 13). • Replace the water tank cap onto the tank by twisting it to the right, making sure the cap is firmly sealed. The arrows should align on the tank and cap. • Reinsert the tank into the air washer water basin (Fig. 14). WARNING - AVOID ELECTRIC SHOCK. DO NOT PLUG THE AIR WASHER INTO THE ELECTRICAL OUTLET IF THERE IS SPILLED WATER NEAR YOU OR THE AIR WASHER (Fig. 15). Fig. 12 Fig. 13 ig. 14 ig. 15 5