Honeywell HAW500 User Guide - Page 9

OPERATION (continued) • Lay flat on a towel to dry thoroughly (overnight drying is recommended or a minimum of 8 hours) (Fig. 33). • Place the filter screen back into the filter assembly (Fig. 34) and reinsert back into the air washer unit (Fig. 35). • Re-insert the water tank into the air washer basin (Fig. 36). • Plug the unit back into the electrical outlet ensuring there is no standing water in the vicinity (Fig. 37). • Press the filter clean indicator reset button and hold down for 1.5 seconds to reset the timer after cleaning (Fig. 38). Fig. 33 Fig. 35 Fig. 37 INSTRUCTIONS FOR CLEANING • Turn the unit off and unplug the electrical cord (Fig. 39). WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK UNPLUG THE AIR WASHER BEFORE CLEANING. • Do not use chemical cleaners to clean your air washer (Fig. 40). • Remove the tank from the air washer (Fig. 41). • Remove the air washer housing from the basin by lifting the housing up and pulling it away from the basin. Set the housing to the side (Fig. 42). Fig. 39 Fig. 41 Fig. 34 Fig. 36 Hold 1.5 seconds reset Fig. 38 Fig. 40 Fig. 42 9