Hoover F5917900 Owners Manual - Page 6

I Storing hose Stretch hose out and identify ends. E. Nozzle connector end of hose G. Solution tube R Trigger H. Converter end of hose Note: You may find it helpful when storing the hose to refer to the informa- tion on the back of the carpet cleaner and on the converter end of the hose. Start with converter end of hose (H). Fit converter over tab near tool hold- er (I). Press converter firmly to snap in place. Press solution tube (G) into clip next to converter as shown. | _-J Wrap hose around hook on upper handle (J). Press hose into clips on upper hose holder (K). Wrap hose around lower tool holder and continue until nozzle connector is near upper hose holder. Clip hose in place. Press cord into cord clip on back of hose holder. Pull cord tight. Upfront too| storage Stair/upholstery nozz|e To store stair/upholstery nozzle, open tool door, place nozzle in bracket and fit it securely into position. To remove, reverse this procedure. How t:o reattach too| cover The tool cover is designed with a break-away feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with slots on sides of tool storage area. Push cover down to secure in place.