Hoover S3612 Manual - Page 4

8 8 Push plug on power nozzle cord completely into receptacle under- neath hand grip. Always disconnect cleaner from electrical outlet before attaching or removing power nozzle plug. How to use To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 9 B A ON-OFF switches After assembling cleaner, plug 9 cord into electrical outlet. Turn cleaner on by depressing ON-OFF pedal (A). To turn cleaner off, depress pedal again. Note: Pedal opposite ON-OFF pedal is Cord Rewind Pedal (B). 1 0 1 1 1 2 A Check bag indicator 1 0 The indicator will begin to show red as bag fills with dirt. There are three conditions that will cause the indicator to become completely red: 1. The bag is full; change the bag. 2. Very fine materials (such as powder) have been picked up, clogging the bag pores; change the bag, even if it is not full. 3. There is a blockage in the nozzle, hose, tools, or at the bag opening; remove the b l o c k a g e . Deluxe power nozzle Handle positions 1 1 The handle has two positions when used with the power nozzle: upright and operating. To lower handle to operating position, place your foot firmly on the power nozzle and pull handle back. Floor surface selector Carpet or rug cleaning 1 2 When using the power nozzle for carpet and rug cleaning, push the floor surface selector button toward "RUG" (A). This setting provides the suction and agitator action necessary to deep clean carpets. The nozzle adjusts automatically to various carpet pile heights. 4