Hotpoint RVM5160MPSA Installation Instructions - Page 19
Adjust The Exhaust, Adaptor, Connecting Ductwork, Mount The Oven
View all Hotpoint RVM5160MPSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation Instructions B6. MOUNT THE OVEN (continued) Cabinet Front Cabinet Bottom Shelf Filler Block Equivalent to Depth of Cabinet Recess Self-Aligning Screw Oven Top Attach the oven to the top cabinet by inserting 2 self-aligning screws through outer top cabinet 3 holes. Turn two full turns on each screw. Be sure to keep power cord tight. Be careful not to pinch the cord, especially when mounting flush tobottom of cabinet. B7. ADJUST THE EXHAUST ADAPTOR Open the top cabinet and adjust the exhaust adaptor to connect to the house duct. Damper Back of Oven Cover Plate B8. CONNECTING DUCTWORK House Duct 4 Tighten the two screws to the top of the oven completely. (While tightening screws, hold the oven in place against the wall and the top cabinet.) 5 Install grease filters. See the Owner's Manual packed with the oven. 1 Extend the house duct down to connect to the exhaust adaptor. 2 Seal exhaust duct joints using duct tape. 31-7000091 Rev. 2 19