Hunter 18860 Owners Manual - Page 18

Troubleshooting Guide Problem Probable Cause Solution 1. Nothing happens; blades - do not rotate* 1. Power turned off or fuse blown. 2. Loose'Wire connections or wrong connections 3. Pull-chain switch not "on:' 4. Reversing switch in center. • 1. lbrn power on or replace fuse. 2. Loosen canopy. Check all connections (turn power • off while checking). Refer to page 13. 3. Pull switch cord. 4. Slide revetsing switch either up or down. *NOTE: If blades will not turn by hand, contact your nearest service representative or dealer. 2. Noisy operation. • 1. - Blade irons loosely screwed to rotor. 2. Blade screwed loosely to blade iron. 3. Blade cracked. 4. Canopy contacting ceiling. 1. Tighten screws until snug. 2. Tighten. • 3. Replace all 4 blades. Contact dealer. 4. Lower canopy. 3. Excessive wobbling. 1. Unbalanced blades. 2. Inadequate blade clearance. 3. Loose blades or blade irons. 4. Fan not secure on hanger assembly. 1. Rebalance. (See Step 7D.) 2. Relocate fan. (Refer to page 7.) 3. Tighten all screws. 4. Run power off. Support fan very carefully. Loosen canopy and hang correctly. (Refer to pages 11 and 12.) If you have checked the above problems and still have trouble, call I-901-745-9222. 18