Hunter 18860 Owners Manual - Page 8
Inspect
![]() |
View all Hunter 18860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
B. Fan mounting height: Your Limited Edition fan comes with the proper hardware to hang the fan from a standard 8' ceiling, so the fan blades will be 12" from the ceiling and approximately 7 feet from the floor. See Fig. 2. Your fan also comes with an additional set of hardware to mount the fan to ceilings of 812/ feet and over. See Fig. 3. Step 4 is divided into two sections to cover the two ceiling heights. If your ceiling is over 9 feet, you may wish to use a longer hanger pipe to achieve the desired hanging height. Optional hanger pipes needed for higher ceilings are available from Hunter. - 8 - 8 1/2 FT. CEILING HEIGHT 8 1/2 FT & UP CEILING HEIGHT HANGER BRACKET CANOPY SETSCREWS . 2 3/4" PIPE 7" PIPE HANGER ADAPTOR MOTOR AND CASE FIGURE 2 T FIGURE 3 Step 2: Inspect Fan A. Unpack the fail carefully to avoid any damage to the components. CAUTION: Never lift the fan by the motor wires. Let the fan rest in the carton liner for protection. B. Check the sacked parts. CAUTION: The pipe nipple has a special coating on the threads. Do not remove the coating. It is to help prevent the pipe nipple from unscrewing. U - BRACKET & MTG SCREWS 0 II SHORT PIPE ADAPTOR HANGER BRKT TT CANOPY & BLADE SCREWS 8 7" PIPE BUSHING
![](/manual_guide/products/hunter-18860-owners-manual-5c21f55/8.png)