Hunter 18860 Owners Manual - Page 4
These, Instructions., Caution
![]() |
View all Hunter 18860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
READ AND SAVE THESE INSTRUCTIONS. CAUTION: Read this entire instruction manual thoroughly before begitie ning installation and save these instructions. 2. 'lb avoid possible electric shock, BE CERTAIN ELECTRICI- TY IS SHUT OFF AT MAIN PANEL BEFORE WIRING. Always turn power °Mat main panel before servicing your fan or installing accessories. All wiring must be in accordance with national and local electrical codes. If you are unfamiliar With wiring, you should use a qualified electrician. 3. Follow instructions accurately to make certain the fan is prop- erly attached to the ceiling structure. Make absolutely certain all pipes and set screws are tight, and bushing pin is in place. FAILURE TO FOLLOW THESE STEPS COULD RESULT IN THE FAN FALLING. 4. NEVER REST THE FAN ON THE SWITCH HOUSING. As you prepare the fan for installation, let the motor rest in the liner in which it was packed. 5. Do not use an abrasive cleanser on the fan. A mild detergent will clean and restore most units to their original beauty. . TO ENSURE QUIET OPERATION AND FULL EFFICIENCY OF YOUR FAN, PLEASE FOLLOW ALL THE INSTRUC- TIONS CAREFULLY, OBSERVING THE "CAUTION" NOTA- TIONS FOR EACH STEP. • 6. If this fan is used as a replacement for an original olde tyme non- reversible fan, it must be installed per instructions included with this fan. DO NOT HANG ON SINGLE "J" HOOK. Failure to follow these instructions could result in fan falling. 7. Do not use a non-metallic outlet box. The installation of your Hunter Ceiling Fan. NOTE TO INSTALLERS: Please leave this manual with the owner. Tools needed: • Pliers • 11/64" bit • Flat blade screw driver • 3 wire connectors • Phillips screw driver • 4 "x 12/ " round electrical outlet • Electric drill box • 3/8" socket wrench 4
![](/manual_guide/products/hunter-18860-owners-manual-5c21f55/4.png)