Hunter 42177 Owner's Manual - Page 22
Selector Switches
View all Hunter 42177 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installation Selector Switches 2 1. F°/C° selector (Fahrenheit / Celsius): Your thermostat is set for F° mode from the factory. In order to change to C° mode, slide the switch to C° and press the reset button on front of the thermostat with a paper clip. NOTE: Unless the reset button is pressed, the thermostat will not change temperature mode. 2. Heating System Selector (HG - HE switch): The factory position for this switch is in the "HG" position. Leave it in this position if you have a gas furnace or an oil burner. If you have an electric furnace, test to see whether the Heat and Fan come on as expected after installation. If the Fan operation is normal, leave it in the "HG" position. If the Fan does not come on within a minute of the thermostat calling for heat, change the switch position to "HE". The system selector has no effect in the cooling mode. NOTE: "HG" position is for gas and most other systems. "HE" position is for certain electric systems having a fan relay. 22 44043-01 • 02/19/2010