Husqvarna EZ4824 Owners Manual

Husqvarna EZ4824 Manual

Get Husqvarna EZ4824 PDF manuals and user guides View all Husqvarna EZ4824 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna EZ4824 manual content summary:

  • Husqvarna EZ4824 | Owners Manual - Page 1
    Operator Manual EZ4824EC / 965880201 EZ4824K / 965880301 EZ4824 / 965880401 EZ5221 / 965880501 EZ5224 / 965880601 EZ5226 / 965921601 EZ6124 / 965880701 Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English
  • Husqvarna EZ4824 | Owners Manual - Page 2
    altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit without consent from the
  • Husqvarna EZ4824 | Owners Manual - Page 3
    51 Deck Outer Spindle 51 Engine Oil 52 Engine Oil Levels 52 Changing the Engine Oil 53 *Transaxle (Transmission) Fluid Change 54 Hydraulic Pump Fluid Change 55 Purging Procedures 56 TROUBLESHOOTING 57 STORAGE 59 Winter Storage 59 Service 59 schematics 60 TECHNICAL DATA 61 Accessories
  • Husqvarna EZ4824 | Owners Manual - Page 4
    practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the
  • Husqvarna EZ4824 | Owners Manual - Page 5
    provided by the manufacturer. Operating instructions for the accessories are provided with delivery. All other types of uses are incorrect. The manufacturer's directions concerning operation, maintenance, and repairs must be carefully followed. Lawn mowers and all power equipment, can be potentially
  • Husqvarna EZ4824 | Owners Manual - Page 6
    in the Service Journal in this operator's manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This Operator's Manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing
  • Husqvarna EZ4824 | Owners Manual - Page 7
    the manual. Used also when there is a potential for misuse or misassembly. RN Reverse Neutral Fast Slow Choke Fuel Warning! Parking Brake CE conformity marking. Only for European market Warning! Rotating blades, keep away from the discharge deck Do not touch parts Battery acid
  • Husqvarna EZ4824 | Owners Manual - Page 8
    symbols and decals Read Operator's Manual Shut off engine and remove key before performing any maintenance or or remove safety shields while engine is running Careful backing up, watch for other people Careful going forward, watch for other people Moving sharp blades under cover 8-Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 9
    in place and working • Slow down before turning. • Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. • Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before
  • Husqvarna EZ4824 | Owners Manual - Page 10
    Manual. Local laws may regulate the age of the user. • Keep machine free of grass, leaves or other debris buildup which can touch the hot exhaust or engine parts and burn. Do not allow the mower deck to plow leaves or other debris, causing buildup to occur. • Clean any oil WARNING! Engine exhaust and
  • Husqvarna EZ4824 | Owners Manual - Page 11
    driving. • Always wear gloves when handling the blades. • Never wear loose clothing that can get caught in moving parts or turning on a slope. If the tires lose traction, disengage the blades and drive up or down hills with slopes greater than 10 degrees. Do not drive across any slopes. Husqvarna-11
  • Husqvarna EZ4824 | Owners Manual - Page 12
    adult other than the operator. • Be alert and turn machine off if a child enters the area. • Before children. • Never carry children, even with the blades shut off. They may fall off and be seriously driving on slopes 8011-509 Never allow children to operate the machine 8011-517 12-Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 13
    WARNING! The engine must not be started when the driver's floor plate or any protective plate for the mower deck's drive belt is removed. start the engine near spilled fuel. • Never use gasoline as a cleaning agent. • If leaks arise in fuel system, engine must not be started until problem has been
  • Husqvarna EZ4824 | Owners Manual - Page 14
    and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. • Check brake operation frequently. Adjust and service as required. • Maintain or replace safety and instruction labels, as necessary
  • Husqvarna EZ4824 | Owners Manual - Page 15
    . Only use approved repair parts for the machine. • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake's functionality regularly. Adjust and service as necessary. • The mulch blades should only be used in
  • Husqvarna EZ4824 | Owners Manual - Page 16
    parking brake, turn off the fuel drive system. • Do not tow with this mower. They may jackknife or overturn causing damage to the mower deck 8011-514 WARNING! Escaping hydraulic oil under pressure can have sufficient force to penetrate the skin, causing serious injury. If injured by escaping fluid
  • Husqvarna EZ4824 | Owners Manual - Page 17
    CONTROLS This operator's manual describes the Husqvarna Zero Turn Rider. The rider is fitted with either a Kohler or Briggs & Stratton four-stroke overhead valve engine developing 24-26 horse power*. Transmission from the engine is made via a belt-driven hydraulic pumps. Using the left and right
  • Husqvarna EZ4824 | Owners Manual - Page 18
    rotation of the right wheel is reduced and the machine turns to the right. Zero turn can be achieved by moving one control backward (behind the 022 WARNING! The machine can turn very rapidly if one steering control is moved much further forward than the other. 1 18-Husqvarna 2 3 4 1. Forward
  • Husqvarna EZ4824 | Owners Manual - Page 19
    idling the engine for long periods, as there is a risk of fouling the spark plugs. USE FULL THROTTLE WHEN MOWING, for best mower performance and battery charging. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF 8058-020 Throttle control Blade Switch In order to engage the mower deck, pull the
  • Husqvarna EZ4824 | Owners Manual - Page 20
    to start and stop the engine. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF Choke Control The choke control is used for cold starts in order to provide the engine with a richer fuel mixture functions: 20 Amp Primary fuse 7.5 Amp Mower deck coupling 8052-001 8052-001 20-Husqvarna Fuses 8011-420
  • Husqvarna EZ4824 | Owners Manual - Page 21
    in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never
  • Husqvarna EZ4824 | Owners Manual - Page 22
    to the blade tip with the engine not running. IMPORTANT INFORMATION In order to obtain an even cutting height, it is important that the air pressure in all tires is 15 psi / 103 kPa / 1 bar. IMPORTANT INFORMATION Always raise the deck to the highest position for transport. The mower deck's lifting
  • Husqvarna EZ4824 | Owners Manual - Page 23
    The CHG OIL icon will come on and shut off automatically. The hour meter cannot be manually reset. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF 8058-034 Hour meter Tracking Knob If the mower is not tracking counterclockwise to decrease speed. Tracking knob 8052-001 8058-020 Husqvarna-23
  • Husqvarna EZ4824 | Owners Manual - Page 24
    operation Read "Safety Instructions" section and following pages, if you are unfamiliar with the machine. Training Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities. We suggest that this section be reviewed in its entirety prior to
  • Husqvarna EZ4824 | Owners Manual - Page 25
    in and pulling the lever fully upwards. Set mower deck to transport position 8058-019 Disengage the mower blades by pressing the blade switch downwards. Pull parking brake upwards to activate. 8058-020 FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF Depress blade switch 8052-001 Husqvarna-25
  • Husqvarna EZ4824 | Owners Manual - Page 26
    middle position. Place controls in neutral position 8061-026 If the engine is cold, the choke control should be pulled up. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF Set the throttle 8052-001 26-Husqvarna FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF Set the choke control 8052-001
  • Husqvarna EZ4824 | Owners Manual - Page 27
    to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF Set the engine speed 8056-001 Husqvarna-27
  • Husqvarna EZ4824 | Owners Manual - Page 28
    . The other vehicle must also be a 12-volt negative grounded system. Do not use your mower to start other vehicles. If your battery is too weak to start the engine, it should be recharged. (See "Battery" in the Maintenance Section.) If "jumper cables" are used for emergency starting, follow this
  • Husqvarna EZ4824 | Owners Manual - Page 29
    thrown by the rotating blades. Secure selected cutting height 4. Push the release button on the cutting height lever and move lever to the pin, release the button. 5. Set the cutting height with the cutting height adjustment lever. 8058-020 8058-024 Mower deck lifting lever 8058-019 Husqvarna-29
  • Husqvarna EZ4824 | Owners Manual - Page 30
    and the machine turns to the right. Turning on the spot (zero turn) can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. Operating On Hills Read the Safety Instructions "Driving on Slopes" in
  • Husqvarna EZ4824 | Owners Manual - Page 31
    top surface of the deck. Avoid flooding water on top surface, engine and electrical components. • When the mulching kit is used, it is important that the mowing interval is frequent. WARNING! Clear the lawn of stones and other objects that can be thrown out by the blades. Mowing pattern 8011-603
  • Husqvarna EZ4824 | Owners Manual - Page 32
    it has been worked hard. Avoid idling the engine for longer periods, as there is a risk of the spark plugs fouling. • Disengage the mower deck by depressing the blade switch. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF 8052-001 Disengage the mower deck and move throttle to minimum • Raise the
  • Husqvarna EZ4824 | Owners Manual - Page 33
    operation Manual Transport ZT-2800 Bypass Linkages When pushing or pulling the mower, engage the ZT-2800 (Integrated Zeroturn Transaxle) bypass linkages. The ZT-2800 bypass linkages are located on the rear of the frame, below the rear engine guard. 1. Raise the deck into the highest cutting
  • Husqvarna EZ4824 | Owners Manual - Page 34
    the mower deck Start the engine and blades, listen for unusual sounds Check for damage Thoroughly clean around the engine Clean around belts, belt pulleys Check the tire pressures Check battery Sharpen/Replace mower blades Clean the engine's cooling air intake 2) Clean the air cleaner's pre-filter
  • Husqvarna EZ4824 | Owners Manual - Page 35
    of belts, belt pulleys Change the engine oil 1) Replace the engine oil filter Clean/replace the spark plugs Replace the fuel filter Replace the air filter (paper filter) 2) Check the caster wheels (every 200 hours) Replace the air cleaner's pre-filter 2) (foam) Check/adjust the mower deck Check
  • Husqvarna EZ4824 | Owners Manual - Page 36
    MAINTENANCE Battery Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • See chart for charging
  • Husqvarna EZ4824 | Owners Manual - Page 37
    gap 8011-054 Safety System The machine is equipped with a safety system that prevents starting or driving under the following conditions. The engine can only be started when: 1. The mower deck is disengaged. 2. The steering controls are in the outer, locked neutral position. 3. The parking brake
  • Husqvarna EZ4824 | Owners Manual - Page 38
    Throttle Cable Check that the engine responds to throttle increases and that a good engine speed is attained at full throttle. If doubts arise, contact the service workshop. If adjustments are and tighten the clamping screw. 38-Husqvarna Adjusting the choke cable 8061-014 8011-605 8011-605
  • Husqvarna EZ4824 | Owners Manual - Page 39
    air to clean the air filter. Do not wash the paper filter. Do not oil the paper filter. 7. Mount the filter in the air filter housing. 8. Replace the cover over the air filter housing and secure with screws. Remove filter IMPORTANT INFORMATION Operating the engine with loose or damaged air
  • Husqvarna EZ4824 | Owners Manual - Page 40
    Servicing Precleaner If so equipped, wash and re-oil element assembly for servicing. Make sure engine oil. Squeeze out all excess oil. Servicing engine causing premature wear and failure. 1 4 3 2 1. Air cleaner access door 2. Air cleaner element 3. Latch 4. Precleaner (on some models) Air filter
  • Husqvarna EZ4824 | Owners Manual - Page 41
    filter cowling 8011-768 3. Remove the wing nuts for the air filter and remove the paper filter. IMPORTANT INFORMATION Do not use compressed air to clean the air filter. Do not wash the paper filter. Do not oil the paper filter. Remove pre-filter Remove paper filter 8011-557 8011-558 Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 42
    Regularly check that the fuel pump's air filter is free from dirt. Remove the screws and open the pump, no hoses need be removed. The filter can be cleaned with a brush if necessary. Replace the filter on the console. Fuel filter 42-Husqvarna Fuel pump air filter 8009-181 8011-468 8009-147
  • Husqvarna EZ4824 | Owners Manual - Page 43
    the parking brake. Perform a standstill test and check that there is sufficient braking action. To adjust the parking brake, contact the Husqvarna service workshop. IMPORTANT INFORMATION The machine must be absolutely standing still when applying the parking brake. Parking brake 8058-020 WARNING
  • Husqvarna EZ4824 | Owners Manual - Page 44
    may damage the belt. Belt Shields Removing deck belt Deck Belt Installation NOTE: For ease in installing the deck belt, refer to the routing decal on the top of the deck. 1. Wrap the deck belt around the electric clutch pulley that is located on the engine shaft. 2. Route the belt forward and up
  • Husqvarna EZ4824 | Owners Manual - Page 45
    of the idler pulley. 3. Wrap the belt around the engine pulley. 4. Reattach the spring on the pump idler arm. 5. Reinstall the deck belt. (see Deck Belt Installation in this section of the manual). 1. Electric clutch 2. Idler spring 3. Clutch stop Pump belt removal 1 2 3 8054-002 Husqvarna-45
  • Husqvarna EZ4824 | Owners Manual - Page 46
    ground/grass (down) or "THIS SIDE UP" facing deck and cutter housing. 3. Install and tighten blade bolt securely. 4. Torque blade bolt to 90 ft/lbs (122 Nm). IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware than
  • Husqvarna EZ4824 | Owners Manual - Page 47
    be adjusted slightly higher in the rear. NOTE:To insure accuracy of leveling procedure, mower deck drive belt must be installed prior to leveling deck. 1. Wear heavy gloves. Turn each outer blade tip to align with the deck or in a side-to-side manner. 2. Measure from the floor surface up to the
  • Husqvarna EZ4824 | Owners Manual - Page 48
    deck is at the desired cutting height in the operating position. Anti-scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. IMPORTANT INFORMATION Adjust anti-scalp rollers with the mower rollers to support the deck. Anti-scalp rollers IMPORTANT INFORMATION
  • Husqvarna EZ4824 | Owners Manual - Page 49
    mower deck. Use compressed air to clean the top side of mower deck. Regularly clean deck and underside of the deck with normal water pressure. Do not use a high pressure washer or steam cleaner. Avoid spraying engine your dealer for service. Foam filled models) Caster wheels 8011-619-4 Husqvarna-49
  • Husqvarna EZ4824 | Owners Manual - Page 50
    engine oil. When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease. For daily use, the machine should be lubricated twice weekly. Wipe away excess grease after lubrication. It is important to avoid getting lubricant on the belts or the drive surfaces
  • Husqvarna EZ4824 | Owners Manual - Page 51
    Use minimal lubrication and remove excess lubricant so that is does not come into contact with belts or belt pulley drive surfaces. Lubricating the front wheels Deck Spindle Lower the cutting deck completely. If a grease gun without a rubber hose is used, the foot plate must be removed. Lubricate
  • Husqvarna EZ4824 | Owners Manual - Page 52
    . Engine Oil Filter • Drain the engine oil in accordance with the work description under the heading Engine Oil/Change Engine Oil. • Remove the oil filter. If necessary, use a filter remover. • Wipe new, clean engine oil onto the seal for the new filter. • Mount the filter by hand with +¾ turn
  • Husqvarna EZ4824 | Owners Manual - Page 53
    oil to run out into the container. • Reinstall the oil drain valve cap. • Replace the oil filter if necessary. • Fill with new engine oil in accordance with Checking the Oil Level. • Start the engine. Run it for 3-5 minutes. Stop and recheck the oil level. The dipstick markings 8009-159 Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 54
    for ease of maintenance. To ensure constant fluid quality levels and longer life, an oil filter change interval of every 200 hours is recommended. The following procedure is performed with the transaxles installed in the mower and the mower on level ground. Apply the pump release valve for each
  • Husqvarna EZ4824 | Owners Manual - Page 55
    MIN-ADD line on the reservoir. After purging, check levels and add oil if necessary. 7. Reinstall the tank cap by hand. Do not overtighten. 8. Proceed to the purge procedure. 2 3 1 1. Pump filter 2. Pump reservoir 3. Fluid fill lines Changing the hydraulic pump oil filter 8061-016 Husqvarna-55
  • Husqvarna EZ4824 | Owners Manual - Page 56
    oil under pressure can have sufficient force to penetrate the skin, causing serious injury. If injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately. Disengage the parking brake 8058-020 56-Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 57
    TROUBLESHOOTING Problem Engine will not start Starter does not turn the engine over Engine runs rough Engine seems weak Machine vibrates Cause • Blade switch is engaged. • Steering controls are not locked in the neutral position • Parking brake is not activated • Battery is dead • Contamination in
  • Husqvarna EZ4824 | Owners Manual - Page 58
    TROUBLESHOOTING Problem Engine overheats Battery not charging The machine moves slowly, unevenly, or not at all Mower deck not engaging Transaxle leaks oil Uneven mowing results Cause • Clogged air intake or cooling fins • Engine overloaded • Poor ventilation around engine • Defective engine speed
  • Husqvarna EZ4824 | Owners Manual - Page 59
    up damage to the paint and spray a thin layer of oil on the underside of the mower deck to avoid corrosion. 2. Inspect the machine for worn or damaged parts and tighten any nuts or screws that may have become loose. 3. Change the engine oil; dispose of properly. 4. Empty the fuel tanks or add a fuel
  • Husqvarna EZ4824 | Owners Manual - Page 60
    YEL BRN BLU YEL TO GRN ENGINE PIGTAIL GRY PUR WHT BLK WHT GRN RED/BLK RED/BLK 20 AMP POSITION 2 - RUN1 YEL/RED RED POSITION 3 - RUN2 BRN PUR PUR PUR BLK BLK POSITION 4 - START PTO SW. 7.5 AMP HOURMETER ELECTRIC CLUTCH BLK ENGINE GROUND BLK BLK ACCESSORY OUTLET 60-Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 61
    TECHNICAL DATA Accessories Collection system Engine crankshaft bolt Deck pulley bolts Lug nuts Blade bolt Torque Nm) HEX HEAD CAP SCREWS The torque values shown should be used as a general guideline when specific torque values are not given. U.S. Standard Hardware Grade Husqvarna-61
  • Husqvarna EZ4824 | Owners Manual - Page 62
    filter Engine oil (See viscosity diagram) Fuel Fuel tank capacity Spark plugs / gap Cooling Air filter Alternator Starter Transmission Transmission Speed and direction controls Speed forward Speed reverse Brakes Front caster tires, smooth tread Rear tires, turf pneumatic Tire pressure EZ4824
  • Husqvarna EZ4824 | Owners Manual - Page 63
    Blade Engagement Deck Construction Productivity Dimension Weight Base Machine Length Base Machine Height Base Machine Width Overall Width, Chute Up Overall Width, Chute Down TECHNICAL DATA EZ4824 cm 46½" / 118 cm 48½" / 123 cm 59¾" / 152 cm EZ4824 / 965880401 48" / 122cm 1.5 - 4.5" / 3.8 - 11.4 cm
  • Husqvarna EZ4824 | Owners Manual - Page 64
    Manufacturer Type Power Lubrication Oil capacity excluding filter Oil capacity including filter Engine oil (See viscosity diagram) Fuel Fuel tank capacity Spark plugs / gap Cooling Air filter Alternator Starter Transmission Transmission Speed and direction controls Speed forward Speed reverse Brakes
  • Husqvarna EZ4824 | Owners Manual - Page 65
    Cutting Widthr Cutting Height Uncut Circle Number of Blades Blade Length Nose Rollers Sprung Seat Hinged Arm Rests Hour Meter Blade Engagement Deck Construction Productivity Dimension Weight Base Machine Length Base 74½" / 189 cm 47" / 119 cm 46½" / 118 cm 52½" / 133 cm 66¼" / 168 cm Husqvarna-65
  • Husqvarna EZ4824 | Owners Manual - Page 66
    Oil capacity excluding filter Oil capacity including filter Engine oil (See viscosity diagram) Fuel Fuel tank capacity Spark plugs / gap Cooling Air filter Alternator Mechanical parking brake 13 x 5.0-6, 4 ply 22 x 9.5-10 15 PSI / 103 kPa / 1 bar *As rated by the engine manufacturer. 66-Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 67
    Cutting Widthr Cutting Height Uncut Circle Number of Blades Blade Length Nose Rollers Sprung Seat Hinged Arm Rests Hour Meter Blade Engagement Deck Construction Productivity Dimension Weight Base Machine Length Base 76" / 193 cm 47" / 119 cm 46½" / 118 cm 61¾" / 157 cm 75½" / 192 cm Husqvarna-67
  • Husqvarna EZ4824 | Owners Manual - Page 68
    USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents. CE requirements The Declaration
  • Husqvarna EZ4824 | Owners Manual - Page 69
    , blade adapters, bulbs, clutches, clutch drums, filters (fuel line, fuel filters, air filters, oil filters), sprockets, guide bars, lubricants, rewind springs, spark plugs; (2) Natural discoloration of material due to ultraviolet light; (3) Engine and drive systems not manufactured by Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 70
    switch. 5. Check that the right amount of oil is in the engine. 6. Adjust the position of the steering controls. 7. Fill with fuel and open the fuel shut off valve. 8. Start the engine. 9. Check that there is drive to both wheels. 10. Check the mower deck adjustment. 11. Check: The safety switch for
  • Husqvarna EZ4824 | Owners Manual - Page 71
    SERVICE JOURNAL Action After the First 5-8 Hours 1. Change engine oil. Date, mtr reading, stamp, sign □ Husqvarna-71
  • Husqvarna EZ4824 | Owners Manual - Page 72
    JOURNAL Action 25-Hour Service 1. Check the engine air filter. 2. Sharpen/Replace mower blades if required. 3. Check the tire pressures. 4. Check battery with cables. 5. Lubricate according to lubrication chart. 6. Check/clean the engine's cooling air intake. 7. Clean the air cleaner's prefilter
  • Husqvarna EZ4824 | Owners Manual - Page 73
    the air cleaner's filter cartridge (paper filter) (shorter intervals for dusty operating conditions). 3. Change engine oil. 4. Lubricate according to lubrication chart. 5. Check/adjust the parking brake. 6. Change hydraulic pump oil and filter. Date, mtr reading, stamp, sign Husqvarna-73
  • Husqvarna EZ4824 | Owners Manual - Page 74
    oil filter. 4. Clean/replace the spark plugs. 5. Replace the fuel filter. 6. Check V-belts. 7. Check tighten caster wheel axle bolts (every 200 hours). 8. Change the air filter's paper cartridge. 9. Change hydraulic pump oil and filter. (200 hours) Date, mtr reading, stamp, sign 74-Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 75
    -hour service. 2. Perform the 50-hour service. 3. Perform the 100-hour service. 4. Check/adjust the mower deck. 5. Clean the combustion chamber and grind the valve seats. 6. Check the engine valve clearance. 7. Replace the air cleaner's prefilter (foam). Date, mtr reading, stamp, sign Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 76
    5. Replace the engine oil filter (100 hours). 6. Check/adjust the cutting height. 7. Check/adjust the parking brake (50 hours). 8. Clean/change the spark plugs (100 hours). 9. Change the fuel filter (100 hours). 10. Check the engine valve clearance. Date, mtr reading, stamp, sign 76-Husqvarna
  • Husqvarna EZ4824 | Owners Manual - Page 77
    Action SERVICE JOURNAL Date, mtr reading, stamp, sign Husqvarna-77
  • Husqvarna EZ4824 | Owners Manual - Page 78
  • Husqvarna EZ4824 | Owners Manual - Page 79
  • Husqvarna EZ4824 | Owners Manual - Page 80
    P/N 115 129627 IR 10/29/08
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
English
Operator Manual
EZ4824EC / 965880201
EZ4824K / 965880301
EZ4824 / 965880401
EZ5221 / 965880501
EZ5224 / 965880601
EZ5226 / 965921601
EZ6124 / 965880701
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.