Husqvarna EZ4824 Owners Manual - Page 42

Fuel Filter, Fuel Pump Air Filter

Get Husqvarna EZ4824 PDF manuals and user guides View all Husqvarna EZ4824 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

MAINTENANCE 4. Tap the paper filter against a fixed surface to remove dust. If the paper filter is still dirty, it must be replaced. To refit filter: 1. Check that the seal on the bottom of the paper filter is whole. 2. Mount the paper filter in the air filter housing and tighten the wing nuts. 3. Refit the pre-filter on the paper filter. 4. Replace the cowling over the air filter housing. Do not over tighten the plastic fastener. Remove dust Fuel Filter Replace the line-mounted fuel filter every 100 hours (once per season) or more regularly if it is clogged. 1. Replace the filter as follows: 2. Move the hose clamps away from the filter. Use flat-nosed pliers. 3. Pull the filter loose from the hose ends. 4. Push the new filter into the hose ends. Position the filter with the "FLOW" arrow pointing up toward the fuel pump. If necessary, a soap solution can be applied to the filter ends to ease mounting. 5. Move the hose clamps back toward the filter. Fuel Pump Air Filter Regularly check that the fuel pump's air filter is free from dirt. Remove the screws and open the pump, no hoses need be removed. The filter can be cleaned with a brush if necessary. Replace the filter on the console. Fuel filter 42-Husqvarna Fuel pump air filter 8009-181 8011-468 8009-147

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
MAINTENANCE
42
-Husqvarna
Fuel Filter
Replace the line-mounted fuel filter every 100 hours
(once per season) or more regularly if it is clogged.
Replace the filter as follows:
1.
Move the hose clamps away from the filter. Use
2.
flat-nosed pliers.
Pull the filter loose from the hose ends.
3.
Push the new filter into the hose ends. Position the
4.
filter with the “FLOW” arrow pointing up toward the
fuel pump. If necessary, a soap solution can be
applied to the filter ends to ease mounting.
Move the hose clamps back toward the filter.
5.
8011-468
Fuel filter
Fuel Pump Air Filter
Regularly check that the fuel pump’s air filter is free
from dirt.
Remove the screws and open the pump, no hoses
need be removed.
The filter can be cleaned with a brush if necessary.
Replace the filter on the console.
8009-147
Fuel pump air filter
8009-181
Remove dust
Tap the paper filter against a fixed surface to
4.
remove dust. If the paper filter is still dirty, it
must be replaced.
To refit filter:
Check that the seal on the bottom of the paper
1.
filter is whole.
Mount the paper filter in the air filter housing
2.
and tighten the wing nuts.
Refit the pre-filter on the paper filter.
3.
Replace the cowling over the air filter housing.
4.
Do not over tighten the plastic fastener.