Husqvarna EZ4824 Owners Manual - Page 30

operation 6. Engage the mower deck by pulling out the blade switch. 7. Move throttle control to full throttle. The machine's speed and direction are continuously variable using the two steering controls. When both controls are in the neutral position, the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively. In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right. Turning on the spot (zero turn) can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. Operating On Hills Read the Safety Instructions "Driving on Slopes" in the "Safety Instructions". WARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF Set blade engagement and throttle control • The slowest speed possible should be used before starting up or down hills. • Avoid stopping or changing speed on hills. • If stopping is absolutely necessary, pull drive levers into the neutral position and push to the outside of the unit and engage the parking brake. Place controls in neutral position IMPORTANT INFORMATION Control levers return to neutral when released. This may cause the mower to suddenly stop. • To restart movement, release the parking brake. • Pull the control levers back to the center of the mower and press forward to regain forward motion. • Make all turns slowly. 30-Husqvarna Parking brake released 8052-001 8061-026 8058-020