Husqvarna EZ4824 Owners Manual - Page 27

operation Press in and turn the ignition key to the start position. STOP Turn to the start position When the engine starts, immediately release the ignition key back to the run position. IMPORTANT INFORMATION Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying. STOP 8050-780 Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, "half throttle" for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke). Return to run position 8050-781 WARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces. FAST CHOKE SLOW UP BLADES ON DOWN BLADES OFF Set the engine speed 8056-001 Husqvarna-27