Husqvarna L321AH Owner Manual - Page 14

Operation

Get Husqvarna L321AH PDF manuals and user guides View all Husqvarna L321AH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

2. Loosen the lower handle knobs to unlock the handle. 2. Attach the grass bag to the frame with the quickaction clips. 3. Fold the handle down rearward. 4. Remove the knobs and the pins on the lower handle. 5. Fold the handle forward. To assemble the grass catcher 1. Attach the grass catcher frame to the grass bag with the rigid part of the bag on the bottom. Keep the handle of the frame out of the top of the bag. Operation Introduction WARNING: Before you operate the product, you must read and understand the safety chapter. Before you operate the product 1. Read the operator's manual carefully and make sure that you understand the instructions. 2. Examine the cutting equipment to make sure that it is correctly attached and adjusted. See To examine the cutting equipment on page 13. 3. Fill the fuel tank. See To fill fuel on page 8. 4. Fill the oil tank and do a check of the oil level. See To do a check of the oil level on page 6. To fill fuel If available, use low-emission/alkylate gasoline. If lowemission/alkylate gasoline is not available, use good quality unleaded gasoline or leaded gasoline with octane number not less than 90. CAUTION: Do not use gasoline with an octane number less than 90 RON (87 AKI). This can cause damage to the product. 1. Open the fuel tank cap slowly to release the pressure. 2. Fill slowly with a fuel can. If you spill fuel, remove it with a cloth and let remaining fuel dry off. 3. Clean the area around the fuel tank cap. 4. Tighten the fuel tank cap fully. If the fuel tank cap is not tightened, there is a risk of fire. 8 1240 - 001 - 08.07.2019

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
2.
Loosen the lower handle knobs to unlock the handle.
3.
Fold the handle down rearward.
4.
Remove the knobs and the pins on the lower handle.
5.
Fold the handle forward.
To assemble the grass catcher
1.
Attach the grass catcher frame to the grass bag with
the rigid part of the bag on the bottom. Keep the
handle of the frame out of the top of the bag.
2.
Attach the grass bag to the frame with the quick-
action clips.
Operation
Introduction
WARNING:
Before you operate the product,
you must read and understand the safety
chapter.
Before you operate the product
1.
Read the operator's manual carefully and make sure
that you understand the instructions.
2.
Examine the cutting equipment to make sure that it
is correctly attached and adjusted. See
To examine
the cutting equipment on page 13
.
3.
Fill the fuel tank. See
To fill fuel on page 8
.
4.
Fill the oil tank and do a check of the oil level. See
To do a check of the oil level on page 6
.
To fill fuel
If available, use low-emission/alkylate gasoline. If low-
emission/alkylate gasoline is not available, use good
quality unleaded gasoline or leaded gasoline with octane
number not less than 90.
CAUTION:
Do not use gasoline with an
octane number less than 90 RON (87 AKI).
This can cause damage to the product.
1.
Open the fuel tank cap slowly to release the
pressure.
2.
Fill slowly with a fuel can. If you spill fuel, remove it
with a cloth and let remaining fuel dry off.
3.
Clean the area around the fuel tank cap.
4.
Tighten the fuel tank cap fully. If the fuel tank cap is
not tightened, there is a risk of fire.
8
1240 - 001 - 08.07.2019