Husqvarna ST 427 Owner Manual - Page 8
Assembly
View all Husqvarna ST 427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
• Use protective glasses when you are near batteries. • Do not wear watches, jewelry or other metal objects near the battery. • Keep the battery out of reach for children. • Charge the battery in a space with good airflow. • Keep flammable materials at a minimum clearance of 1 m when you charge the battery. • Discard replaced batteries. See Disposal on page 29. • Explosive gases can come from the battery. Do not smoke near the battery. Keep the battery away from open flames and sparks. California Proposition 65 Proposition 65 Safety instructions for maintenance WARNING: Read the warning instructions that follow before you use the product. • The exhaust fumes from the engine contain carbon monoxide, an odorless, poisonous and very dangerous gas. Do not start the engine indoors or in closed spaces. • Before you do the maintenance on the product, stop the engine and remove the ignition cable from the spark plug. • Use protective gloves when you do maintenance on the blades. The blades are very sharp and cuts can easily occur. • Accessories and changes to the product that are not approved by the manufacturer, can cause serious injury or death. Do not change the product. Always use accessories that are approved by the manufacturer. • If the maintenance is not done correctly and regularly, the risk of injury and damage to the product increases. • Only do the maintenance as given in this operator's manual. All other servicing must be done by an approved service agent. • Let an approved service agent do servicing on the product regularly. • Replace damaged, worn or broken parts. Assembly To remove the product from the carton 1. Remove loose parts included with the product. Cut the four corners of the carton and put the end panels down flat. 2. Remove the two screws that attach the auger housing to the pallet. Remove the steel brackets from the skid plates if they have it. 3. Remove all package materials. 4. Remove the product from the carton and make sure no loose parts are left in the carton. Loose parts Discharge chute (1) ON/OFF key (s) Carriage bolts 5/16-18 x 2 ¼" (2) Chute retainer 8 876 - 011 - 11.05.2020