IBM 17351GX User Guide - Page 31
Setting up the LCM2 appliance, last UCO cable in the chain.
![]() |
View all IBM 17351GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 2: Installation 17 4. Attach one end of the Cat5 cable to the second RJ-45 connector on the UCO cable for the first target device. 5. Attach the other end of this cable to the first RJ-45 connector of the UCO cable for the second target device. 6. Repeat steps 3 through 5 for all target devices that you chain together. 7. When you reach the end of the chain, attach a terminator to the second RJ-45 connector on the last UCO cable in the chain. Setting up the LCM2 appliance With the LCM2 appliance, you can auto detect and configure each port on the appliance. Chapter 3 provides detailed instructions on naming customization and OSCAR interface setup and configuration.
![](/manual_guide/products/ibm-17351gx-user-guide-d8380fd/31.png)
Chapter 2: Installation
17
4.
Attach one end of the Cat5 cable to the second RJ-45 connector on the UCO cable for the first
target device.
5.
Attach the other end of this cable to the first RJ-45 connector of the UCO cable for the second
target device.
6.
Repeat steps 3 through 5 for all target devices that you chain together.
7.
When you reach the end of the chain, attach a terminator to the second RJ-45 connector on the
last UCO cable in the chain.
Setting up the LCM2 appliance
With the LCM2 appliance, you can auto detect and configure each port on the appliance. Chapter 3
provides detailed instructions on naming customization and OSCAR interface setup
and configuration.