IBM 17351GX User Guide - Page 43
Setting appliance security
View all IBM 17351GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3: Basic operations 29 If multiple keyboards are connected to the local port, they must be of the same type (PC or Mac) and of the same language. Issues might arise when you use the US keyboard country code with a keyboard of another country. For example, the Z key on a US keyboard is in the same location as the Y key on a German keyboard. You can use the Keyboard window to send a different keyboard country code than the default US setting. Figure 3.7: Keyboard window To change the keyboard country code, complete the following steps: 1. Press Print Screen to start the OSCAR interface. The Main window opens. 2. Click Setup > Keyboard. The Keyboard window opens. 3. Select the country code for the keyboard, and click OK. Confirm the change in the Keyboard Warning window. 4. Click OK to save the change, or click X or press Escape to exit without saving the change. Setting appliance security You can enable a screen saver to start if the user remains unused for a specified length of time. When the screen saver starts, the user is disconnected from any target device to which it was connected. The screen saver stops when you press any key or move the mouse. To immediately start the screen saver, press Print Screen and press Pause. If you set a password, the keyboard and mouse are locked when the screen saver starts. When you press a key or move the mouse while the screen saver is running, a Password window opens, and you must type the password and click OK to unlock the keyboard and mouse. Important: If you forget the password, you must call technical support. See "Appendix C" for contact information. To enable the screen saver, complete the following steps: 1. Press Print Screen. The Main window opens.