IBM 17353LX User Guide - Page 23

Chapter 2: Installation 9 General • Observe and follow service markings. • Do not service any switch except as explained in the switch documentation. • Opening or removing covers that are marked with the triangular symbol with a lightning bolt might expose you to electrical shock. • Components inside these compartments should be serviced only by a trained service techni- cian. • The rack console switch contains no serviceable components. Do not attempt to open. • If any of the following conditions occur, unplug the rack console switch from the electrical outlet and replace the part or contact the trained service provider: • The power cable, extension cable, or plug is damaged. • An object has fallen into the product. • The rack console switch has been exposed to water. • The rack console switch has been dropped or damaged. • The rack console switch does not operate correctly when you follow the operating instructions. • Keep the rack console switch away from radiators and heat sources. Also, do not block cooling vents. • Do not spill food or liquids on the rack console switch components, and never operate the rack console switch in a wet environment. If the rack console switch gets wet, see the appropriate section in the troubleshooting guide or contact the trained service provider. • Use the rack console switch only with approved equipment. • Enable the rack console switch to cool before removing covers or touching internal components.