IBM 1735R16 User Guide - Page 22
Network Configuration, For Microsoft Windows NT® using default drivers, Start, Settings
![]() |
View all IBM 1735R16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 2: Installation 15 To configure the RCM hardware: 1. You will see the Terminal Applications menu with six options. Select option 1, Network Configuration. Figure 2.4: Network Configuration Menu 2. Select option 1 to set your network speed. When possible, you should set your connection manually without relying on the auto negotiate feature. Once you enter your selection, you will be returned to the Network Configuration menu. 3. Select option 2 and specify if you are using a static or BootP IP address. Use a static IP address for ease of configuration. If you are using a BootP address, please configure your BootP server to provide an IP address to the RCM, skip step 4 and continue to the next procedure. 4. Select options 3-5 from the Network Configuration menu, in turn, to finish configuring your RCM for IP address, Netmask and Default Gateway. Once this is completed, type a Ø to return to the main menu. To adjust the mouse acceleration: Before a server can be connected to the RCM, an adjustment to mouse acceleration must be made. Use the default Microsoft® Windows® PS/2 mouse driver for all attached Microsoft Windows systems attached to the RCM. For Microsoft Windows NT® (using default drivers): 1. From the desktop, select Start - Settings - Control Panel - Mouse. 2. Click on the Motion tab.
![](/manual_guide/products/ibm-1735r16-user-guide-05b3ae8/22.png)