IBM 1735R16 User Guide - Page 38
Assigning device types, To access the Devices dialog box, To assign a device type
View all IBM 1735R16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 3: Analog Port Operation 31 Assigning device types While the RCM automatically discovers cascade switches attached to your unit, you will need to specify the number of ports on the cascade switch through the Devices dialog box. The RCM recognizes KVM switches. You will see an Sw-8 appear in the Type category. When you select that switch from the list, the Modify button appears, allowing you to assign the appropriate number of ports to it. To access the Devices dialog box: 1. Press Print Screen. The Main dialog box will appear. 2. Click Setup - Devices. The Devices dialog box appears. NOTE: The Modify button will only be available if a configurable switch is selected. Figure 3.5: Devices Dialog Box When the RCM discovers a cascade switch, you will notice the port numbering change to accommodate each server under that switch. For example, if the switch is connected to port 1, the switch port would be listed as 01 and each server under it would be numbered sequentially 01-01, 01-02 and so on. To assign a device type: 1. In the Devices dialog box, select the desired port number. 2. Click Modify. The Device Modify dialog box appears.