IBM 1735R16 User Guide - Page 25
To connect a CCO cable to an IBM C2T server, To add a legacy KVM switch, back of your C2T server.
View all IBM 1735R16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
18 RCM Installer and User Guide To connect a CCO cable to an IBM C2T server: 1. Locate the CCO cables and CAT 5 cabling for your RCM. 2. Attach one end of the CAT 5 cabling that will run from your CCO to the RCM to the RJ45 connector on the CCO cable. 3. Connect the other end of the CAT 5 cable to an ARI port on the back of your RCM. 4. Attach C2T connector from the CCO cable into the appropriate port on the back of your C2T server. To add a legacy KVM switch: You can add your cascade switches to the RCM system. In a cascaded system, each ARI port will accommodate up to 24 servers, depending on how many servers you can attach to your legacy KVM switch. RCM KCO Cable Terminator IBM NetBAY Console Switch Server 1 Figure 2.7: RCM Configuration with a Legacy KVM Switch 1. Mount the KVM switch into your rack cabinet. Locate a length of CAT 5 cabling to connect your RCM to the KCO cable for your switch. 2. Attach one end of the CAT 5 cabling to the RJ45 connector on the KCO cable. Attach a terminator to the second RJ45 connector on the KCO.