IBM 1735R16 User Guide - Page 27
To connect the network and turn on your RCM, To install your NetBAY VC software
View all IBM 1735R16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
20 RCM Installer and User Guide Analog Workstation Remote Workstation KCO Cable A KCO Cable B Second KCO connects to user port on the front of the switch IBM NetBAY 2x8 Switch Server 1 Server 2 Server 3 KVM Figure 2.8: Cascaded Multi-user Legacy Switch Configuration To connect the network and turn on your RCM: 1. Connect your network cable from the LAN port on the rear of the RCM to your network. 2. The components in the RCM system can be turned on in any order. However, since the CO cables are powered by the servers, turn on the servers first and then turn on all attached RCMs and switches for the most efficient startup. To install your NetBAY VC software: See the NetBAY Virtual Console Software Installer and User Guide that ships with your RCM system.