IBM 2498B24 User Guide - Page 47
LED patterns, Power status LED patterns - sfp
![]() |
UPC - 883436031462
View all IBM 2498B24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
LED patterns Table 4 through Table 7 on page 25 summarize the switch LED locations, color, and meaning, as well as any recommended user response. Power status LED patterns The power status LED patterns are shown in Table 4 Table 4. Power status LED patterns, status, and recommended actions LED name LED color Recommended Status of hardware action Power Status LED No light Primary power cord Verify that switch is is disconnected or is on and has not actively powered, completed booting. or power supply has Verify cord failed. connections are secure. Steady green Switch is on and No action is required. power supply is functioning properly. System status LED patterns The system status LED patterns are shown in Table 5 Table 5. System status LED patterns, status, and recommended actions LED name LED color Recommended Status of hardware action System Status LED No light Switch is off, boot is Verify that switch is not complete, or boot on and has failed. completed booting. Steady green Switch is operational. No action is required. Slow-flashing green (on 1 second, off 1 second) One or both of the Check environmental following are true: conditions, error log, One or more Port Status LEDs, environmental ranges SFPs, cables, and are exceeded. loopback plugs. Error log contains Correct error one or more port condition. Clear error diagnostic error log. Rerun messages. diagnostics to verify fix. Amber Switch is faulty, or initializing. Wait a few moments to verify that the switch is not initializing. Port status LED patterns Each port has one LED port status indicator. Table 6 on page 24 shows the LED color, status, and recommended action for these port LEDs. Chapter 3. Operating the switch 23
![](/manual_guide/products/ibm-2498b24-user-guide-d96de74/47.png)