IBM 2498B24 User Guide - Page 48
LED name, LED color, Status of hardware, Recommended, action, portDisable, switchEnable - express manual
![]() |
UPC - 883436031462
View all IBM 2498B24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Table 6. Port LED patterns during normal operation LED name LED color Recommended Status of hardware action Port status No light No light or signal Check SFP and cable. carrier (SFP or cable) detected. Steady green Port is online (connected to external device) but has no traffic. No action is required. Slow-flashing green (on 1 second, off 1 second) Port is online but segmented, indicating a loopback cable or incompatible switch. Verify that the correct device is connected to the port and that the switch and port settings are correct. Fast-flashing green (on 1/4 second, off 1/4 second) Port is in internal No action is required. loopback (diagnostic). Flickering green Port is online, with traffic flowing through port. No action is required. Steady amber Port is receiving light No action is required. or signal carrier but is not yet online. Slow-flashing amber (on 1 second, off 1 second) Port is disabled as If all ports are the result of slow-flashing amber, diagnostics or the switch could be portDisable disabled. Enable the command. If all ports port using the are slow-flashing portEnable amber, the switch command; refer to could be disabled. Fabric OS Command Reference Manual for more information. If all ports are slow-flashing amber, enable the switch (switchEnable command). Fast-flashing amber (on 1/4 second, off 1/4 second) Port is faulty. Check the Port Status LEDs, error log, SFP, and cable or loopback plug. Clear the error log. Rerun the diagnostics to verify that the error condition is fixed. 24 SAN24B-4 Express Installation, Service, and User Guide
![](/manual_guide/products/ibm-2498b24-user-guide-d96de74/48.png)