IBM 419452u User Manual - Page 41
Installing, Remote, Supervisor, Adapter, SlimLine
UPC - 883436026604
View all IBM 419452u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
J8 ServeRAID controller J9 Hard disc drivebackplane If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on page 38. Installing a Remote Supervisor Adapter II SlimLine Install an optional Remote Supervisor Adapter II SlimLine in the Remote Supervisor Adapter II SlimLine connector on the system board. See the illustration in "System-board optional-device connectors" on page 19 for the location of the connector. After the Remote Supervisor Adapter II SlimLine is installed, the systems-management port on the rear of the server is active. Important: When the optional Remote Supervisor Adapter II SlimLine is installed in the server, you can install only a half-length adapter in expansion slot 1. Notes: 1. When you start the server for the first time after you install a Remote Supervisor Adapter II SlimLine, the startup process will take several minutes longer than a typical startup. 2. Earlier versions of the Remote Supervisor Adapter II SlimLine might not work in this server. See http://www.ibm.com/servers/eserver/serverproven/compat/us/ for the supported Remote Supervisor Adapter II SlimLine versions. To install a Remote Supervisor Adapter II SlimLine, complete the following steps. Chapter 2. Installing optional devices 27