IBM 419452u User Manual - Page 60
Configuration/Setup
UPC - 883436026604
View all IBM 419452u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
example, you can define a startup sequence that checks for a CD or DVD in the CD or DVD drive, then checks the hard disk drive, and then checks for a USB key drive (flash drive). If the server has Wake on LAN hardware and software and the operating system supports Wake on LAN functions, you can specify a startup sequence for the Wake on LAN functions. If you have not changed the default startup sequence, the server starts the devices in the following order: the CD or DVD drive; then, the USB diskette drive, USB memory key, USB CD drive, or USB hard disk drive, if you have installed any in the server; then, the hard disk drives that are connected to the system board; then, the drives that are connected to the SAS/SATA controller; then, the integrated Ethernet controllers 1 and 2. This choice is on the full Configuration/Setup Utility menu only. v Advanced Setup Select this choice to change settings for advanced hardware features. Important: The server might malfunction if these choices are incorrectly configured. Follow the instructions on the screen carefully. This choice is on the full Configuration/Setup Utility menu only. - CPU Options Select this choice to enable or disable core multiprocessing, the execute-disable bit capability, and other microprocessor functions. - PCI Bus Control Select this choice to view the system resources that are used by installed PCI devices. - RSA II Settings This choice is displayed only when a Remote Supervisor Adapter II SlimLine is installed in the server. Select this choice to view the IP address, DHCP settings, and gateway settings for the Remote Supervisor Adaptor II SlimLine, and to view or change the DHCP control, static IP address, subnet mask, gateway static IP address, and operating-system USB selections for the Remote Supervisor Adapter II SlimLine. - Baseboard Management Controller (BMC) Settings Select this choice to change Intelligent Platform Management Interface (IPMI) settings for the mini-BMC controller. - IPMI Specification Version This is a nonselectable menu item that displays the IPMI version. - BMC Firmware Version This is a nonselectable menu item that displays the BMC firmware version. - BMC Build Date This is a nonselectable menu item that displays the date that the BMC code was created. - BMC Build Level This is a nonselectable menu item that displays the version of the BMC code. - Existing Event Log number This is a nonselectable menu item that displays the number of entries in the BMC system-event log. - BMC POST Watchdog Enable or disable the mini-BMC POST watchdog. Disable is the default setting. 46 IBM System x3250 M2 Types 4190 and 4194: User's Guide