IBM 4368E3U User Manual - Page 34
System-board, Installation, guidelines
View all IBM 4368E3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
System-board LEDs The following illustration shows the light-emitting diodes (LEDs) on the system board. Board VRD fault LED Standby power LED Microprocessor fan LED DIMM 1 LED DIMM 2 DIMM 3 LED LED DIMM 4 LED System fan LED Hard drive fan LED Slot 1, PCI Express x8 LED Slot 2, PCI Express x4 LED Slot 3, PCI-X 64-bit 133 MHz LED Slot 4, PCI 32-bit 33 MHz LED Slot 5, PCI 32-bit 33 MHz LED Mini-PCI slot LED Mini-BMC heartbeat LED Microprocessor LED For more information about the system-board LEDs, see the Problem Determination and Service Guide on the IBM System x Documentation CD. Installation guidelines Important: Before you install optional hardware devices, make sure that the server is working correctly. Start the server, and make sure that the operating system starts, if an operating system is installed, or that a 19990305 error code is displayed, indicating that an operating system was not found but the server is otherwise working correctly. If the server is not working correctly, see "Solving Problems" in the Installation Guide for diagnostic information. Before you install optional devices, read the following information: v Read the safety information that begins on page v, the guidelines in "Working inside the server with the power on" on page 22, and "Handling static-sensitive devices" on page 23. This information will help you work safely. v When you install your new server, take the opportunity to download and apply the most recent firmware updates. This step will help to ensure that any known issues are addressed and that your server is ready to function at maximum levels of performance. To download firmware updates for your server, complete the following steps. 20 System x3200 M2 Types 4367 and 4368: User's Guide