IBM 4368E3U User Manual - Page 77
Using, ServerGuide, Setup, Installation, features
View all IBM 4368E3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Using the ServerGuide Setup and Installation CD The ServerGuide Setup and Installation CD contains a setup and installation program that is designed for your server. The ServerGuide program detects the server model and optional hardware devices that are installed and uses that information during setup to configure the hardware. The ServerGuide program simplifies operating-system installations by providing updated device drivers and, in some cases, installing them automatically. If the ServerGuide Setup and Installation CD did not come with the server, you can download a free image of the CD or purchase the CD from the ServerGuide fulfillment Web site at http://www.ibm.com/systems/management/serverguide/ sub.html. To download the free image, click IBM Service and Support Site. Note: Changes are made periodically to the IBM Web site. The actual procedure might vary slightly from that is described in this document. The ServerGuide program has the following features: v An easy-to-use interface v Diskette-free setup, and configuration programs that are based on detected hardware v ServeRAID Manager program, which configures your ServeRAID adapter with RAID capabilities v LSI Configuration Utility program that you use to set up and configure RAID arrays. Note: The LSI Configuration Utility program on the ServerGuide Setup and Installation CD provides limited RAID capability. Use the LSI Configuration Utility program that is integrated in the BIOS to get the full range of RAID configuration capabilities. Start the server and watch the monitor; at the prompt > press Ctrl+C. v Device drivers that are provided for the server model and detected hardware v File-system type that is selectable during setup ServerGuide features Features and functions can vary slightly with different versions of the ServerGuide program. To learn more about the version that you have, start the ServerGuide Setup and Installation CD and view the online overview. Not all features are supported on all server models. The ServerGuide program requires a supported IBM server with an enabled startable (bootable) CD or DVD drive. In addition to the ServerGuide Setup and Installation CD, you must have the operating-system CD or DVD to install the operating system. The ServerGuide program performs the following tasks: v Sets system date and time v Detects an installed ServeRAID adapter and runs the SAS/SATA RAID configuration program v Checks the microcode (firmware) levels of a ServeRAID adapter and determines whether a later level is available from the CD v Detects installed optional hardware devices and provides updated device drivers for most adapters and devices v Provides diskette-free installation for supported Windows operating systems Chapter 3. Configuring the server 63