IBM 6500-V15 Maintenance Manual - Page 151

Operator Panel Message ENERGY SAVER MODE E Net Test Unavailable Display Messages Table 3. Message List Explanation Corrective Action Status message: the printer is in low-energy idle state, all fans and higher voltages are off, only +5VDC logic circuits are active. The Ethernet PCBA did not initialize correctly. No action required. 1. Cycle power. Wait for "E Net Ready" to display, then retry operation. If it still fails, power down, unplug the printer, and reseat the ethernet NIC in its PCI slot. 2. Print the Ethernet Test Page from the Operator Print Tests. 3. Verify that the IP address, subnet mask, and default gateway address are correct in the printout. 4. Verify that the IP address can be "pinged." 5. If the message still appears, replace the ethernet NIC. 151