IBM 6500-V1P Maintenance Manual - Page 232

RibbonMinder Operation the selections at that level. Pressing the ENTER key selects an item and the system inserts an asterisk ( * ) to indicate that this is now the default option. NOT READY PRINTER CONTROL Interface Selection Display Language Print Direction Hex Print Mode Power On State Paper Jam Detection Forms Speed Set Platen at BOF Shuttle Timeout Energy Saver Timer OCR Font Density Eject/Restore PTR Setup Option File System Power Stacker 1 Auto Elevator 1 Printer Management Port Top Exit Tear Distance Ribbon End Point Ribbon Action PRINTER CONTROL Ribbon End Point Ribbon End Point Darker +1, +2, +3, +4, +5, +6 1 If power stacker is installed PRINTER CONTROL Ribbon Action Ribbon Action Stop At RBN End* Ribbon Action Ignore RBN End Ribbon End Point Normal* Ribbon End Point Lighter -1, -2, -3, -4, -5, -6, -7, -8, -9, -10 Ribbon End Point Factory default is Normal. This value corresponds to the character life expectancy of the detected, authorized ribbon installed in the printer. RibbonMinder tracks ribbon life to the recommended end point before declaring 301 RIBBON INK LOW or 146 RIBBON INK OUT. This is a global setting: it is in effect for all printer configurations and cannot be set for individual printer configurations. To change this setting, press the SCROLL↓ or SCROLL↑ key to select "Darker +1" through "Darker +6" (SCROLL↓) or "Lighter -1" through "Lighter -10" (SCROLL↑), where each increment or decrement corresponds to a predetermined set value (density). Pressing SCROLL↓ or RIGHT changes the value by one increment per key press. The second line of the display changes to show the action taken. Press ENTER to select the desired level. The changed setting will remain in effect until it is adjusted 232