IBM 8676 Hardware Maintenance Manual - Page 18
Standby
![]() |
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
v You can remove all power from the computer by disconnecting the server from the ac power source. Standby mode When the server is connected to an ac power source but has not been turned on, it is in Standby mode. When the server is in Standby mode, the operating system is not running, and all core logic except for the service processor is shut down. The power-on LED flashes to indicate that the server is in Standby mode. The server can respond to requests from the service processor, such as a remote request to turn on the server. To put the server into Standby mode when the server is turned on, shut down the operating system (see your operating-system documentation), and press the power-control button. The ISMP can also put the server into Standby mode. Additionally, if the server has an optional Remote Supervisor Adapter installed or is connected to an ASM interconnect network that contains at least one server with an optional Remote Supervisor Adapter installed, you can also put the server into Standby mode remotely through the Remote Supervisor Adapter user interface. 8 xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide
![](/manual_guide/products/ibm-8676-hardware-maintenance-manual-3c8d08a/18.png)