IBM 8837 User Manual - Page 33
information
UPC - 000435421401
View all IBM 8837 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Complete the following steps to install an adapter into slot 2: 1. Open the retaining clips on both sides of the slot 2 riser card. Note: Insert your finger into the access hole on the slot 2 adapter cover to open the retention latch at the rear of the server. The following illustration shows the location of the access hole on the slot 2 adapter cover, the riser card and the riser-card retention latches. Slot 2 adapter cover Access hole to retention latch Riser card Riser card retention latches 2. Lift up and remove the slot 2 adapter cover and attached riser card from the server. 3. Remove the expansion slot cover from the slot 2 adapter cover. Attention: When you handle static-sensitive devices, take precautions to avoid damage from static electricity. For information about handling these devices, see "Handling static-sensitive devices" on page 8. 4. Prior to installing a full-length adapter, rotate the PCI-adapter retainer bracket 90° away from the adapter cover, to allow insertion of the adapter. See the following illustration for reference. 5. Slide the connector portion of the adapter through the slot opening. Chapter 2. Installing options 21