IBM 8837 User Manual - Page 34
Completing, installation, Installing, server, cover
UPC - 000435421401
View all IBM 8837 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6. Press the adapter firmly into the riser-card connector. 7. If you installed a full-length adapter, return the PCI-adapter retainer bracket back to its original position by rotating the PCI-adapter retainer bracket back 90° toward the adapter cover. Place the adapter between the upper and lower guides of the PCI-adapter retainer bracket. 8. Insert the riser card into the riser-card connector on the system board. Attention: When you install an adapter, make sure that the adapter is seated correctly in the connector before you turn on the server. An improperly seated adapter might cause damage to the system board, the riser card, or the adapter. Slot 2 adapter cover Riser card Alignment / retainer tabs Riser-card retention latches 9. Connect any internal cables to the adapter. See the instructions that come with the adapter for details. Attention: Make sure that the cables do not block the flow of air from the fans. See the Option Installation Guide for cable routing information. 10. If you have other options to install or remove, do so now. 11. Go to "Completing the installation." Completing the installation Complete the following steps to complete the installation: 1. Install the server cover. See "Installing the server cover" for more information. 2. Connect the cables and power cords. See "Connecting the cables" on page 23 for more information. 3. Update the server configuration. See "Updating the server configuration" on page 24 for more information. Installing the server cover Complete the following steps to install the server cover: 1. Position the internal cables so that they do not interfere with the cover installation or block the fans. See the Option Installation Guide for more information on routing cables in the server. 22 IBM xSeries 336 Type 8837: Installation Guide