Icom IC-A110 Instruction Manual - Page 13

5 OTHER FUNCTIONS I Initial set mode Initial set mode is accessed at power ON and allows you to set seldom-changed settings. In this way you can "customize" transceiver operations to suit your preferences and operating style. D Entering initial set mode q While pushing and holding [V/M] + [TS(DIAL)], push [POWER] sw to turn power ON. • The transceiver enters initial set mode and "MN", "BP", "ST" or "PR" (p. 11) appears on the display. w Push [TS(DIAL)] to select the desired item as described below and at right. e Turn [DIAL(TS)] to select the desired condition. r Push [SCAN] to exit initial set mode and select the previous operating mode. D Memory names This item allows you to display a memory name instead of frequency. • When a memory channel has not been programmed with a name, frequency indication appears instead. D Beep tones ON/OFF Confirmation beep tones normally sound when you push a key. These can be turned ON or OFF as you prefer. D Side tones ON/OFF When using an optional headset such as those from the David Clark Co. via the adapter, the transceiver outputs your transmitted voice to the headset for monitoring. • Optional OPC-871 HEADSET ADAPTER is required. 10