Icom IC-A110 Instruction Manual - Page 17

7 CLONING D Data cloning ] Cloning allows you to quickly and easily transfer the programmed contents from one transceiver to another transceiver, or, data from PC to a transceiver using the optional CS-A110 cloning software. D Cloning using PC Data can be cloned to and from a PC (IBM compatible) using the optional CS-A110 CLONING SOFTWARE and the optional OPC478 CLONING CABLE+ OPC-592 CLONING CABLE ADAPTER. Consult the CS-A110 CLONING SOFTWARE HELP message for details. D Transceiver to transceiver cloning q Connect the OPC-591 CLONING CABLE with adapter plugs to the [MIC] jack of the master and slave transceivers. • The master transceiver is used to send data to the slave trans- ceiver. w While pushing and holding [Y] + [Z] + [V/M], push [POWER] ON to enter cloning mode (master transceiver only-power ON only for slave transceiver). •"CLONE" appears and the transceivers enter the clone standby condition. e Push [POWER] on the master transceiver. •"CL-OUT" appears in the master transceiver's display. •"CL-IN" appears automatically in the slave transceiver's display. e When cloning is finished, turn power OFF, then ON again to exit cloning mode. D Cloning error When the display at right appears, a cloning error has occurred. In this case, both transceivers automatically return to the clone standby condition and cloning must be repeated. 14