Icom IC-A110 Instruction Manual - Page 18

8 SPECIFICATIONS D General D Receiver • Frequency coverage : 118 to 136.975 MHz • Receive system : Double conversion • Channel spacing : 25 kHz or 25/8.33* kHz superheterodyne • Mode : AM (6K00A3E) • Intermediate frequencies : 1st 38.85 MHz • Number of memory channels : 20 2nd 450 kHz • Acceptable power supply : 13.75* V or 27.5* V DC •Sensitivity (at 6dB S/N) : Less than 1 µV (pd) (negative ground) *Automatic selection • Usable temp. range : -30˚C to +60˚C • Frequency stability : ±5 ppm • Current drain (at 13.75 V DC): Tx 5 A (max.) Rx 4 A ( at AF max.) 0.5 A (at STAND BY) • Dimensions : 150 (W)✕50 (H)✕180 (D) mm (projections not incl.) 529/32(W)✕131/32(H)✕73/32(D) in • Weight : 1.5 Kg; 3 lb 5 oz D Transmitter • Squelch sensitivity (at threshold) • Selectivity 25 kHz ch. spacing 8.33* kHz ch. spacing • Spurious response rejc, • Audio output power : Less than 0.35 µV (pd) : More than ±8 kHz (at -6 dB) Less than ±17 kHz (at -40 dB) Less than ±25 kHz (at -60 dB) More than ±2.778 kHz (at -6 dB) Less than ±7.37 kHz (at -60 dB) : More than 74 dBµ : More than 10 W (at 13.75 V DC with 8 Ω load 60 % MOD. 10% distortion) • Output power : 36 W (pep) typical Side tone More than 100 mW (with 500 Ω 9 W (carrier) typical load 60% MOD. 10 % distortion) • Modulation : Last Stage modulation • Hum and noise : More than 25 dB • Modulation limiting : 70 to 100 % • Audio output impedance : Ext. SP 8 Ω • Audio harmonic distortion : Less than 10 % Side tone 500 Ω (at 85 % modulation) • Hum and noise ratio : More than 40 dB *Except USA version • Spurious emissions • Antenna impedance : -16dBm or less : Standard 50 Ω with SWR