Icom IC-A110 Instruction Manual - Page 2

FOREWORD CAUTIONS READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL - This in- struction manual contains important operating instructions for the IC-A110. EXPLICIT DEFINITIONS R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts advise against continuous high volume operation. If you experience a ringing in your ears, reduce the volume level or discontinue use. NEVER connect the transceiver to an AC outlet or to a power source of more than 27 V DC. Such a connection will damage the transceiver. The explicit definitions below apply to this instruction manual. WORD DEFINITION RWARNING Personal injury, may occur. re hazard or electric shock CAUTION NOTE Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, re or electric shock. NEVER connect the transceiver to a power source that is DC fused at more than 5 A. Accidental reverse connection will be protected by this fuse, higher fuse values will not give any protection against such accidents and the transceiver will be ruined. DO NOT operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. FCC caution: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. DO NOT connect the transceiver to a power source using reverse polarity. This connection will not only blow fuses but also may damage the transceiver. i