Icom IC-M605 Instruction Manual - Page 105

CONNECTIONS AND MAINTENANCE 12 zzConnects to NMEA 0183 In lines of a GPS receiver for position data. ••A GPS receiver compatible with NMEA 0183 format RMC, GGA, GNS, or GLL and VTG sentences is required. Ask your dealer about suitable GPS receivers. NMEA 1 IN (+) NMEA 1 IN (-) NMEA 1 OUT (+) NMEA 1 OUT (-) NMEA 2 OUT (+) NMEA 2 OUT (-) NMEA 2 IN (-) NMEA 2 IN (+) Transceiver's rear panel view u NMEA 2000 CONNECTOR Connects to the NMEA 2000 network. i GPS ANTENNA CONNECTOR Connects the supplied GPS antenna. NOTE: Be sure the GPS antenna is positioned where the GPS antenna has a clear view to receive signals from satellites. o ANTENNA CONNECTOR Connects to a marine VHF antenna with a PL-259 connector. CAUTION: DO NOT transmit without an antenna. DDNMEA 0183 In/Out lines specifications 1 2 PIN SPECIFICATIONS NMEA 0183 OUT (+) Output level: 5 V/40 mA maximum 3 NMEA 0183 OUT (-) (RS-422 balanced type) 4 NMEA 0183 IN (+) Input level: L ess than 2 mA 5 NMEA 0183 IN (-) (at 2 V applied) 6 7 DDConnecting the MA-510TR For the transceiver without a built-in AIS receiver, connect 8 the transceiver to the MA-510TR class B AIS transponder 9 using the accessory cable. After connecting, an Individual DSC call can be made to the AIS target using the 10 transponder without entering the target's MMSI code. 11 LLSee the instruction manual of MA-510TR's connecting instructions. 12 zzConnect each lead to the appropriate lead as follows. 13 ••NMEA 1 OUT (+) or NMEA 2 OUT(+): To NMEA IN (+) 14 ••NMEA 1 OUT (-) or NMEA 2 OUT(-): To NMEA IN (-) ••NMEA 1 IN (+) or NMEA 2 IN (+): To NMEA OUT (+) 15 ••NMEA 1 IN (-) or NMEA 2 IN (-): To NMEA OUT (-) 16 95