Icom IC-M605 Instruction Manual - Page 22
DSC Log p. 58, Radio Settings p. 88, NMEA Settings p. 91, Construction Continued
![]() |
View all Icom IC-M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 MENU SCREEN ■■ Construction (Continued) WX Alert*1 Turn the Weather Alert ••Self-Terminate Turn the Alarm Status for Noise Cancel ••RX ••TX Set the reduction level of the Noise Cancel function. Turn the Noise Cancel function for the transmit signal ON or OFF. Power SW from Sub Unit ••All Units When you turn OFF the command head, the transceiver is turned OFF function ON or OFF. Voice Scrambler*3 Set the Voice Scrambler code. Voice Record Select whether or not to automatically record the voice audio. FAV Settings Set the Favorite channel settings. FAV on MIC Turn the FAV on MIC function ON or OFF. ••Discrete CH 70 SQL Level Self Check Test Procedure*1 Self-Terminate ON or OFF. Turn the Alarm Status for Discrete ON or OFF. Select the Channel 70 squelch level. Starts the self check Test. Select the Single task mode or Multiple task mode. ••AIS Settings (p. 80) at the same time. ••DSC Settings (p. 60) North Up/COG Up Select the display type ••Own Unit The transceiver is not Position Input*2 Enter your position. for AIS plotter. turned OFF even if you Individual ID Enter an Individual ID. CPA/TCPA Edit the alarm settings for turned OFF the command microphone. Group ID Auto ACK Enter a Group ID. Select whether or not to ID Blocking AIS receiver. Enter the vessel's or your ••DSC Log (p. 58) automatically transmit an transponder ID to block. Received Call Log Displays the received call log. Transmitted Call Displays the transmitted Log call log. ••Radio Settings (p. 88) Scan Type*4 Scan Timer*4 Dual/Tri-Watch*4 Channel Group Call Channel Select a Scan Type from Normal Scan or Priority Scan. Turn the Scan Timer function ON or OFF. Select the Dualwatch or Tri-watch function. Select a channel group. Set the Call channel. *1 May not be displayed, depending on the version. CH Auto Switch DSC Data Output Alarm Status ••Safety ••Routine ••Warning Acknowledgement after receiving each type of call. Select whether or to automatically select the channel that the DSC call is received on, when received. Select a DSC Data Output option. Turn the Alarm Status for Safety ON or OFF. Turn the Alarm Status for Routine ON or OFF. Turn the Alarm Status for Warning ON or OFF. ••NMEA Settings (p. 91) NMEA0183 ••Port 1, Port 2 NMEA2000 ••GPS, AIS Select the data transfer speed to receive and transmit data from external devices. Select the sensors in NMEA 2000 network which sends GPS or AIS data to the transceiver. ••Radio Information (p. 93) Displays your transceiver' s Serial number, software version, GPS module version, and so on. *2 Not displayed, when valid GPS data is received. 12 *3 Displayed only when the voice scrambler unit is installed. *4 Not usable in Dutch version.
![](/manual_guide/products/icom-icm605-instruction-manual-e7bd8df/22.png)