Icom IC-M605 Instruction Manual - Page 56
Sending a Test call acknowledgement, Sending a Non-Distress call Continued
![]() |
View all Icom IC-M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
8 DSC OPERATION ■■ Sending a Non-Distress call (Continued) DDSending a Test call acknowledgement When a Test call is received, you can send an acknowledgement. 4. P ush [ACK] . 1. When a Test call is received: ••Alarm sounds. 2. Push any [Alarm Off] . 3. Push [Accept] . ••Enters the DSC Task mode. Push ••T he call contents screen is displayed. LLRotate [CH/ENT] to view the call contents. 5. P ush [Call] to send the acknowledgement. 6. Push [Standby] to return to the Main screen. TIP: When "Test ACK" is set to "Auto," the transceiver automatically sends the acknowledgement. (p. 60) 46
![](/manual_guide/products/icom-icm605-instruction-manual-e7bd8df/56.png)
46
8
DSC OPERATION
1.
When a Test call is received:
• Alarm sounds.
2.
Push any [Alarm Off]
.
3.
Push [Accept]
.
•
Enters the DSC Task mode.
D
Sending a Test call acknowledgement
TIP:
When “Test ACK” is set to “Auto,”
the transceiver automatically sends
the acknowledgement. (p. 60)
When a Test call is received, you can
send an acknowledgement.
4.
Push [ACK]
.
Push
•
The call contents screen is displayed.
L
Rotate [CH/ENT] to view the call
contents.
5.
Push [Call]
to send the
acknowledgement.
6.
Push [Standby]
to return to
the Main screen.
■
Sending a Non-Distress call (Continued)