Icom IC-M605 Instruction Manual - Page 109

MB-132 installation

Get Icom IC-M605 PDF manuals and user guides View all Icom IC-M605 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

CONNECTIONS AND MAINTENANCE 12 ■■MB-132 installation An optional MB-132 flush mount kit is used to mount the transceiver to a flat surface such as an instrument panel. CAUTION: Keep the transceiver and microphone at least 1 meter (3.3 feet) away from your vessel's magnetic navigation compass. 1. U sing the template comes with the transceiver, carefully cut a hole in the instrument panel, or wherever you plan to mount the transceiver. 2. Slide the transceiver through the hole. 3. A ttach clamps on both sides of the transceiver using 1 2 supplied (M5 × 8 mm) bolts. LLMake sure that the clamps align parallel to the transceiver's 2 body. 3 4 5 6 7 8 4. Tighten the end bolts on the clamps (rotate clockwise) 9 so that they press firmly against the inside of the 10 instrument control panel (r). (Torque: 0.6 N•m) 5. Tighten the locking nuts (rotate counterclockwise) so 11 that the transceiver is securely mounted in position, as shown below (t). 12 6. Connect the antenna and power cable, then return the 13 instrument control panel to its original place. 14 15 16 t r 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
99
12
CONNECTIONS AND MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
MB-132 installation
An optional MB-132
FLUSH
MOUNT
KIT
is used to mount the
transceiver to a flat surface such as an instrument panel.
CAUTION:
Keep the transceiver and microphone at least
1 meter (3.3 feet) away from your vessel’s magnetic
navigation compass.
1.
Using the template comes with the transceiver,
carefully cut a hole in the instrument panel, or wherever
you plan to mount the transceiver.
2.
Slide the transceiver through the hole.
3.
Attach clamps on both sides of the transceiver using
2 supplied (M5 × 8 mm) bolts.
L
Make sure that the clamps align parallel to the transceiver’s
body.
4.
Tighten the end bolts on the clamps (rotate clockwise)
so that they press firmly against the inside of the
instrument control panel (
r
). (Torque: 0.6 N•m)
5.
Tighten the locking nuts (rotate counterclockwise) so
that the transceiver is securely mounted in position, as
shown below
(
t
).
6.
Connect the antenna and power cable, then return the
instrument control panel to its original place.
r
t