Icom IC-M605 Instruction Manual - Page 33
Favorite channels, Starting a scan, Setting, Selecting, Clearing
View all Icom IC-M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
6 SCAN OPERATION (Except for the Dutch version) ■■Favorite channels You can quickly recall often-used channels by setting them as Favorite channels. All channels are set as Favorite channels by default. DDSetting 1. Rotate [CH/ENT] to select a channel. 2. Push [Favorite] to set the channel as a Favorite channel. ••" " is displayed. DDSelecting zzPush [∫] or [√] on the microphone. ••Non-Favorite channels are skipped and not displayed. ••When the "FAV on MIC" item is set to "OFF," you can select all channels. (p. 90) TIP: You can select all channels by rotating [CH/ENT] or pushing [∫] or [√] on the transceiver. (p. 14) DDClearing 1. Select a Favorite channel to clear. 2. Push [Favorite] to clear the channel as the Favorite channel. ••" " disappears. TIP: You can clear all Favorite channels in the Menu screen. (p. 90) ■■Starting a scan 1 1. Push [Scan] to start a scan. 2 ••During a Priority scan, "SCAN 16" is displayed. 3 ••During a Normal scan, "SCAN" is displayed. 2. Push [Scan] again to cancel the scan. 4 ••"SCAN 16" or "SCAN" disappears. 5 Example: Starting a priority scan. 6 Scanning starts 7 8 Push 9 10 11 When a signal is received 12 13 NOTE: ••When a signal is received, the scan pauses until the signal 14 disappears, or resumes after pausing for 5 seconds, depending on the "Scan Timer" setting. (p. 88) 15 ••You can check the scanning channel, change the scan direction, 16 or manually resume the scan by pushing [∫] or [√] on either the transceiver or the microphone. ••A beep tone sounds and "16" blinks when a signal is received on Channel 16 during a Priority scan. ••In order to properly receive signals, you must adjust the squelch to the proper level. (p. 18) 23