Icom IC-M803 Instruction Manual - Page 50
Sending a Test call
View all Icom IC-M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7 DSC OPERATION DDSending a Test call You should avoid testing calls on the exclusive DSC Distress channels and safety calling channels. When you cannot avoid testing on a Distress or safety channel, you should indicate that these are test calls. Normally the Test call would require no further calls between the two stations involved. LLYou can send a Test call to a pre-entered Individual address, or manually enter the address before sending. (p. 24) 1. Push . •• The "COMPOSE NON-DISTRESS" screen is displayed. LLTo display the screen from the Menu screen: [MENU] > Compose Non-Distress 2. Select "Message Type." Rotate 3. Select "Test." + Push Rotate + Push 4. Select "Address." Rotate 6. Select "Call frequency." Rotate 7. Select a Call frequency. + Push Rotate + Push 8. Push to send a Test call. •• "Transmitting Test Call" is displayed, and then "Test Call" is displayed. Rotate + Push LLSee pages 27 and 28 for details of the Software Key functions in the DSC Task mode. 9. Push , and then to return to the Main screen. + Push 5. Select an Individual address, or "Manual Input." Rotate + Push NOTE: When you select "Manual Input" in this step, push the Keypad key to manually enter an Individual ID. 42