Icom IC-M803 Instruction Manual - Page 56
Receiving DSC calls (other), Receiving an Individual call
View all Icom IC-M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
7 DSC OPERATION ■■Receiving DSC calls (other) DDReceiving an Individual call NOTE: •• When the "Individual ACK" is set to "Auto (Able)" or "Auto (Unable)," the transceiver automatically sends an Acknowledgment "Able to comply" or "Unable to comply." (p. 57) In that case, both the TX and RX calls are stored in the Transmitted and Received Call Logs. (p. 54) •• To receive an Individual call, push [D-SCAN] to enter the DSC watch mode. (p. 13) 3. Push a key to select an Acknowledgment option. •• The Call Contents screen is displayed 4. Confirm the contents. Rotate When an Individual call is received: •• The alarm sounds until you turn it OFF. •• "Received Individual Call" is displayed. 1. Push to turn OFF the alarm. 5. Push to send an Individual Acknowledgment. 6. Hold down [PTT] to talk. 7. Push , and then to return to the Main screen. TIP: When you send the Acknowledgment, select one of three options, depending on your situation. See pages 36 and 37 for details of the Individual Acknowledgment procedures. 2. Push the Software Key below the intended operation. : Ignores the call and returns to the Main screen. : Puts the RX task on hold, and returns to the Main screen. : Sends an Acknowledgment "Able to comply" without any changes. : E nters the DSC Task mode immediately. NOTE: When you select in this step, you can send an Acknowledgment in the DSC Task mode. To send the Acknowledgment, go to step 3. If you return to the Main screen without sending the Acknowledgment, go to step 7. 48