Icom IC-M803 Instruction Manual - Page 59
Receiving a Geographical Area call, When a Geographical Area call is received
![]() |
View all Icom IC-M803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Rotate DSC OPERATION 7 DDReceiving a Geographical Area call When a Geographical Area call is received: •• The emergency alarm sounds until you turn it OFF. •• "Received Geographical" is displayed. 1. Push to turn OFF the alarm. •• Monitor the Voice frequency that the calling station specified. LLRotate [CH/GRP] to confirm the call contents. LLSee pages 27 and 28 for details of the Software Key functions in the DSC Task mode. 3. Push , and then to return to the Main screen. TIP: When you push in step 2, the countdown will be paused. Push to resume the countdown. LLWhen "Accept after 10 sec." or "Ignore after 10 sec." is selected in "CH Auto Switch" setting, the countdown is displayed on the bottom of the window. (p. 58) After 10 seconds have passed since is 7 pushed, the screen will move to the DSC Task screen, or return to the Main screen. 2. Push the Software Key below the intended operation. : Ignores the call and returns to the Main screen. : Puts the RX task on hold, and returns to the Main screen. : Pauses the countdown. : E nters the DSC Task mode immediately. Rotate •• Monitor the Voice frequency that the calling station specified. LLRotate [CH/GRP] to confirm the call contents. LLSee pages 27 and 28 for details of the Software Key functions in the DSC Task mode. ► Continued on the next page 51
![](/manual_guide/products/icom-icm803-instruction-manual-64748e0/59.png)